Movers dismantled my Wassily chairs and I cannot reassemble them. There are odd screw joiners and I cannot figure out how they are used but they obviously are the major component in holding these together. Any ideas? or experience? or is there are knoll website that might explain this?

quote:

Wassily chairs

Hi Paulen,

I think, you will need a specific type of Hex Screw drivers. Wassily chair parts are usually jointed with nut bolts.

You can use a pliers to hold the bolt back and use the driver to mount the screw into it. It should be pretty simply.

Look at the picture/manual to understand the part positions, Hope that helps.

Good luck out there.